Servo Motors

Consew is pleased to provide the industry with Clinton add-on accessories for a wide variety of
sewing machine makes and models.

• Automatic Reverse
• Automatic Footlift
• Suction devices for retrieving loose ends of fabric, 
leather and thread on sergers, skivers, coverstitchers, etc.
• Custom trimming devices for thread

The CSM1001 is a 3/4 HP (550 Watt) Brushless Servo Motor that includes the Needle Positioner (synchronizer) see photo #3. 
Energy Efficient – Saves up to 70% Electricity.  Speed: 0–4,200 RPM.  
The CSM1000 is the same model without the synchronizer.

The CSM1000 series of High Torque D.C. Electronic Servo Motors from Premier by Consew includes a number of models.
See all the available models in the Model Chart (picture #2)

CSM SERVO MOTOR SERIES...
Energy Efficient – Saves up to 70% Electricity
The CSM2001 is the 220 volt version, 3/4 HP (550 Watt) Brushless Servo Motor,  with the Synchronizer (Needle Positioner.)
The CSM2000 is this motor with the Synchonizer.
(see picture 2 for chart of all CSM motors and picture 3 for view of synchronizer)

CSM5003 SERVO MOTOR.
Automatic Footlift Capability and Needle Position Synchronizer.
1.35 HP (1000 Watt) Brushless Servo Motor
Energy Efficient – Saves up to 70% Electricity
CSM5003 runs at 110v.  (CSM6003 is 220v)

Overview

Electronic Servo Motor:  0 - 3450 RPM
Premier CSM550-1:  550 Watts,  ¾ Horsepower, 110 V., Single-Phase, Energy Saving, Electronic Servo Motor.        
( The Premier CSM500 and the Premier CSM400:  400 Watts,  
½ Horsepower, 110 V. motor have been phased out and the
CSM550-1 is the suggested replacement. )

Premier Stands include:
Table Top with ruler imprint and machine cutout,    Legs with braces,  Foot Treadle,  Adjustable Treadle Rod,  1/2HP, 110VAC Clutch Motor,  Switch & Power Cable,  Accessory Drawer

Many options available. Such as: Locking Wheels, Servo Motors, Lights, Thread Stands, different Table Tops...

See also "Stands, an overview" for a listing of all available stands"

Overview

Parts of a stand:  1. The Legs ("K" leg, T-leg, "H" leg)
2. The table.    3. The motor (& on/off switch)   4. The foot treadle.  5. Links for the foot treadle.  6. Accessories (pedals, knee lift, lights, etc.)

One cannot put a sewing machine on just the legs.  What is needed is a "Complete" stand setup.  The table is usually cut out with a pattern that fits the specific machine that one is putting on the stand.  The motor must be placed in the correct position so the pulleys of the motor and machine line up and a belt can connect them.  Below the table there can be a treadle with a rod connecting it to the motor or an electronic pedal switch controlling the motor depending on which type of motor you are using.  There may also be a knee pad lever for foot lift or other switches depending on the type of machine and what control functions it has. 

In addition to the basics that comprise a working COMPLETE STAND, there are many accessories available including: lighting, thread holders, measuring tape, etc. 

"K" leg, T-leg, "H" leg, Sunken and Space-saver stands available assembled or knocked-down (you assemble.)  We have "Complete Stands" that come with all the necessary basics: the legs, table, motor, switch, pedals.  We have the appropriate stand for your machine!  Tell us what machine it is for and what you need to sew and we will tell you what stand and accessories you need.