Parts of a stand: 1. The Legs ("K" leg, T-leg, "H" leg)
2. The table. 3. The motor (& on/off switch) 4. The foot treadle. 5. Links for the foot treadle. 6. Accessories (pedals, knee lift, lights, etc.)
One cannot put a sewing machine on just the legs. What is needed is a "Complete" stand setup. The table is usually cut out with a pattern that fits the specific machine that one is putting on the stand. The motor must be placed in the correct position so the pulleys of the motor and machine line up and a belt can connect them. Below the table there can be a treadle with a rod connecting it to the motor or an electronic pedal switch controlling the motor depending on which type of motor you are using. There may also be a knee pad lever for foot lift or other switches depending on the type of machine and what control functions it has.
In addition to the basics that comprise a working COMPLETE STAND, there are many accessories available including: lighting, thread holders, measuring tape, etc.
"K" leg, T-leg, "H" leg, Sunken and Space-saver stands available assembled or knocked-down (you assemble.) We have "Complete Stands" that come with all the necessary basics: the legs, table, motor, switch, pedals. We have the appropriate stand for your machine! Tell us what machine it is for and what you need to sew and we will tell you what stand and accessories you need.